AT2020USB+ Instruction Manual AT2020USB+ Cardioid Condenser USB Microphone Contents Introduction & features 3 Setting up your microphone with pivot mount & desk stand 4 Preliminary setup with Mac OS X 5 Preliminary setup with Windows 7 7 Using headphones 10 Using mix control 10 Selecting software 10 Setting your software levels 10 Positioning your microphone 10 Protecting your microphone 10 Specifications 11 @audio-technica.
FCC Notice Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Introduction Thank you for buying the Audio-Technica AT2020USB+ Cardioid Condenser USB Microphone. Equipped with a USB output, this microphone is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The AT2020USB+ offers studio-quality articulation and intelligibility perfect for home studio recording, field recording, podcasting, and voiceover use.
AT2020USB+ 2 3 5 (on back) 1. 2. 3. 4. 5. 6. 7. 8. Capsule - Condenser microphone element with cardioid polar pattern Blue LED - Blue light shows microphone is receiving USB power Headphone Level Control - Dial controls headphone volume Mix Control - Blends microphone and pre-recorded audio Headphone Jack - 1/s-inch (3.
Preliminary setup with Mac OS X 1. Plug the free end of the provided USB cable into the USB port on your computer. The microphone's blue LED will illuminate, indicating the microphone is receiving power. Your computer will automatically recognize the USB device and install a driver. 2 . To select the AT2020USB+ as your audio input, first, open your System Preferences. Finder File Edit About This Mac Software Update ... Mac OS X Software ... Dock Location 3.
Preliminary setup with Mac OS X (co ntinued) 5. Click the output tab and make certain AT2020USB+ is selected as the default output device. (This should have happened automatically.) I Sound £frttts ~ Input Select a devk• for sound outpUc Built-In Audio lint-QUI port Optic.I.I digiuil-out port ~ Show volume In menu bu Your preferences are now set to use the AT2020USB+ on your Mac with GarageBand or another recording program of your choice.
Preliminary setup with Windows 7 1. Plug the free end of the USB cable into the USB port on your computer. The microphone's blue LED light will illuminate, indicating the mic is receiving power. Your computer w ill automatically recognize the USB device and install a driver. 2. In the lower right portion of your screen you may get a message that new hardware was found; or you may see a driver software installation notice. 3.
Preliminary setup with Windows 7 (continued) 4. Select Sound. ~c......,.,_ ... ~ ........ . p ,.._.,,....,._ .. w ,_ _ Adju,t)IDUf .......--. ~ ,... "'""'"'"" ti c-.,,.. ...._ ~ calorM- ,1-..._.. Jf -Opllcos ~-Oplions c,-... -.....i- . 9 ......... ~ o-....,,,.._ .__, _ _ c.,..- fil,_.., Adm1n1JtrftM- Tootf K f.... ltJ- ~ Q ~OtlilU>pGodgfts Eat of AcatN Cl'nt.r G
6. Select the Recording tab, and choose AT2020USB+ as the default device. ( Conl1gur, ' s,t Default ( J3 [i,rop,rtiu j 7. Double click on the AT2020USB+ icon to open the Microphone Properties w indow. Select t he Levels tab to adjust microphone level (loudness). You may need to come back to this w indow to readjust the level after you begin recording. Mlcrophon, 0- - - 153 ~ M1uophonlf' Boost 0- 0.0 dB OK ll canal , .
Additional Information Using headphones Warning: Turn the volume control down before using the headphones. The 1/s'' (3.5 mm) headphone jack on the rear of the microphone allows you to directly monitor your recording without the delay that occurs when monitoring through your computer's headphone output.
AT2020USB+ Specificationst Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20 - 20,000 Hz Power Requirements: USB Power (5V DC) Bit Depth: 16 bit Sample Rate: 44.1/48 kHz Controls: Mix control; Headphone volume control Weight: 386 g (13.6 oz) Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter Output Connector: USB-type Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load) Headphone Jack: 3.
AT2020USB+ To reduce the environmental impact of a multi-language printed document, product information is available online at www.audio-technica.com in a selection of languages. Afin de reduire l'impact sur l'environnement de !'impression de plusieurs, les informations concernant les produits sont disponibles sur le site www.audio-technica.com dans une large selection de langue.
Register your product online at audio-technica.co111/registration @audio-technica. Audio-Technica U.S., Inc.
U.S. Tvvo-Vear Limited End-User Warranty This product and selected Audio-Technica brand products purchased in the U.S.A. from an authorized Audio-Technica (A.T.U.S.) dealer are warranted for two years from date of purchase by A.T.U.S. to be free of defects in materials and workmanship. To identify those products, go to www.audio-technica.com/usawarranties. In event of a defect, End-User's exclusive remedy is at A.T.U.S.' election.
@audio-technica. English of Old Electrical & Electronic Equipment (Applicable in I Disposal European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
~*~Im:~~* :gf3{1j:~~ ~~=*m ¥a 7.l