AT2020 USB Microphone Set-up and Operation Pages 2-13 Installation et utilisation Pages 14-19 Configuración y funcionamiento Páginas 20-25 Configuração e operação Páginas 26-31 Impostazioni e Utilizzo Pagine 32-37 Einrichtung und Betrieb Seiten 38-43
Compliance with FCC rules (USA only) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Preliminary setup with Mac OS X (continued) 3. Next, click Sound to display the Sound preference pane. EN 4. Click the Input tab and select the AT2020 USB as the device for sound input. Your preferences are now set to use the AT2020 USB on your Mac with GarageBand or another recording program of your choice.
Preliminary setup with Windows XP EN (Service Pack 2; other operating systems may vary slightly) 1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver. 2. In the lower right portion of your screen you may see a message that new hardware was found; or you may see a driver software installation notice. 4.
Preliminary setup with Windows XP (continued) EN (Service Pack 2; other operating systems may vary slightly) 5. Select the Audio tab, and choose AT2020 USB as the default device. 7. Through the Wave In window, you can set the computer volume or mute the microphone. 6. Adjust computer volume by clicking on the Volume button beneath Sound recording Default device. Your preferences are now set to use the AT2020 USB with Windows XP with the recording program of your choice.
Preliminary setup with Windows Vista 1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver. EN 5. Select the Recording tab. Make sure that the AT2020 USB microphone is set as the default recording device. (You should see a green check mark beside the USB microphone icon.) 2.
Setting your software levels AT2020 USB Specifications† Correct adjustment of microphone level is important for optimum performance. Ideally, the microphone level should be as high as possible without overloading the input of your computer. If you hear distortion, or if your recording program shows levels that are consistently overloaded (at peak levels), turn the microphone volume (or level) down, either through your control panel (or system preferences) settings, or through your recording software.
Microphone à condensateur cardioïde AT2020 USB —Introduction Configuration de votre microphone avec fixation FR pivotante et trépied inclus Merci d’avoir choisi le microphone à condensateur cardioïde AT2020 USB d’Audio-Technica. Conçu pour l’enregistrement informatisé, ce microphone est idéal pour la capture numérique de musique ou de toute source audio acoustique à l’aide de votre logiciel d’enregistrement préféré. 1. Vissez la fixation pivotante sur le dessus du trépied.
Configuration préalable sous Windows XP (Service Pack 2 ; les autres systèmes d’exploitation peuvent être légèrement différents) 1. Raccordez l’extrémité libre du câble USB au port USB de votre ordinateur. Le voyant de la DEL bleue du microphone s’allume, signalant que le microphone est sous tension. L’ordinateur reconnaît alors automatiquement le périphérique USB et installe un driver. 2.
Installation du microphone Spécifications du microphone AT2020 USB† Il est important de positionner le microphone directement en ligne (sur l’axe) avec la personne qui parle/chante ou l’instrument (ou une autre source sonore) afin d’obtenir la meilleure réponse en fréquence.
Micrófono de condensador cardioide AT2020 USB— Introducción Instalación del micrófono con el soporte pivotante y trípode de mesa incluidos Gracias por comprar el micrófono de condensador cardioide AT2020 USB de Audio-Technica. Diseñado para la grabación basada en computadora, este micrófono es ideal para capturar música de forma digital o cualquier fuente de audio acústica utilizando su software de grabación favorito. 1. Enrosque el soporte pivotante en la parte superior de trípode de mesa.
Configuración inicial con Windows XP (Service Pack 2; la configuración puede variar ligeramente en otros sistemas operativos) 1. Conecte el extremo libre del cable USB incluido al puerto USB de su PC. Se iluminará la luz del LED azul, para indicar que el micrófono está recibiendo energía. Su PC reconocerá automáticamente el dispositivo USB e instalará un controlador. 2.
Posicionamiento del micrófono Especificaciones del AT2020 USB† Es importante situar el micrófono directamente alineado (en el eje) con la persona que habla/canta o con el instrumento (u otra fuente de sonido) para conseguir la mejor respuesta de frecuencia del micrófono. ELEMENTO Condensador polarizado permanente de placa trasera ES con carga fija PATRÓN POLAR Cardioide Si se utiliza para hablar/cantar, el emplazamiento ideal del micrófono es directamente frente a la persona que habla/canta.
Microfone condensador cardióide AT2020 USB — Introdução Instalação do microfone com o suporte articulado e o pedestal de mesa com tripé Agradecemos pela compra do microfone condensador cardióide AT2020 USB da Audio-Technica. Desenvolvido para gravação baseada em computador, este microfone é ideal para a captura digital de músicas ou fontes de áudio acústicas usando seu software de gravação favorito. 1. Parafuse o suporte articulado na parte superior do pedestal de mesa com tripé.
Instalação inicial com Windows XP (Service Pack 2; outros sistemas operacionais podem apresentar pequenas variações) Instalação inicial com o Windows Vista 1. Conecte a extremidade livre do cabo USB à porta USB do computador. O LED azul do microfone acende, indicando que o microfone está recebendo alimentação. Seu computador reconhece automaticamente o dispositivo USB e instala um driver. 1. Conecte a extremidade livre do cabo USB à porta USB do computador.
Posicionamento do microfone Especificações do AT2020 USB† É importante posicionar o microfone diretamente em linha (no mesmo eixo) com a pessoa que está falando/cantando ou com o instrumento (ou outra fonte de som) para alcançar a melhor resposta de freqüência do microfone.
Microfono a condensatore cardioide AT2020 USB — Introduzione Installazione del microfono con supporto girevole e treppiede da tavolo inclusi Grazie per aver scelto il microfono a condensatore cardioide AT2020 USB di Audio-Technica. Progettato per registrazioni con computer, questo microfono è l’ideale per la ripresa sonora digitale di musica o di qualsiasi altro segnale audio, in abbinamento al proprio software di registrazione preferito. 1. Avvitare il supporto girevole in cima al treppiede da tavolo.
Configurazione preliminare in ambiente Windows XP (Service Pack 2; con altri sistemi operativi, la procedura potrebbe essere leggermente diversa) 1. Collegare l’altra estremità del cavo USB alla porta USB del computer. L’accensione del LED blu indica che il microfono è alimentato. Il computer riconosce automaticamente il dispositivo USB e installa i relativi driver. 2.
Posizionamento del microfono AT2020 USB - Specifiche Tecniche† È importante che il microfono venga posizionato direttamente in linea (in asse) con la persona che parla/canta o con lo strumento musicale (o altra sorgente sonora) in modo da ottenere la risposta in frequenza ottimale. TIPO Condensatore permanentemente polarizzato con piastra posteriore a carica fissa DIRETTIVITÀ Cardioide RISPOSTA IN FREQUENZA 20-16.
Das AT2020 USB Kondensatormikrofon mit NierenRichtcharakteristik - Einleitung Einrichtung des Mikrofons mit dem mitgelieferten Drehadapter und dem Dreibein-Tischfuß Danke, dass Sie sich für das das Audio-Technica AT2020 USB Kondensatormikrofon mit NierenRichtcharakteristik entschieden haben. Dieses für die computerbasierte Aufzeichnung entwickelte Mikrofon ist ideal für die digitale Erfassung von Musik oder jeder andern akustischen Audioquelle mit ihrer bevorzugten Aufnahmesoftware. 1.
Vorläufige Konfiguration mit Windows XP (Service Pack 2, bei anderen Betriebssystemen kann es kleine Abweichungen geben) 1. Stecken Sie das freie Ende des USB-Kabels am USB-Port Ihres Computers an. Die blaue LED am Mikrofon leuchtet auf, um anzuzeigen, dass das Mikrofon mit Strom versorgt wird. Ihr Computer erkennt das USB-Gerät automatisch und installiert einen Treiber. 2.
Positionierung des Mikrofons Technische Daten AT2020 USB† Um den besten Frequenzgang des Mikrofons zu erreichen, muss das Mikrofon direkt in einer Linie mit der sprechenden/singenden Person oder dem Instrument (auf der Achse) positioniert werden. WANDLERELEMENT Electret-Kondensator mit permanent polarisiertem Kondensator RICHTCHARAKTERISTIK Niere FREQUENZGANG 20-16.
Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 USA +1 (330) 686-2600 Audio-Technica Limited Old Lane, Leeds LS11 8AG England +44 (0) 113 277 1441 Audio-Technica (Greater China) Limited Unit K, 9/F., Kaiser Est. (Ph.2) 51 Man Yue St. Kowloon, HK. +852-2356-9268 Audio-Technica (S.E.A.) Pte. Ltd. 623 Aljunied Road, #04-10, Aljunied Industrial Complex, Singapore 389835 +65-6749-5686 Audio-Technica Taiwan Co., Ltd. 25-28 Colin, Chungli-city, Taoyuan-county, Taiwan 32050, R.O.C.