Spec Sheet

AT2050
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0202-01
Specications
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
SCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axis
LEGEND
Frequency in Hertz
Response in dB
10 dB
100
50
200
10k
5k
1k
500
2k
20k
Roll-off
Same as 1 kHz
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
SCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axis
LEGEND
Frequency in Hertz
Response in dB
10 dB
100
50
200
10k
5k
1k
500
2k
20k
Roll-off
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
SCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
0˚
150˚
120˚
90˚
30˚
60˚
12" or more on axis
LEGEND
Frequency in Hertz
Response in dB
10 dB
100
50
200
10k
5k
1k
500
2k
20k
Roll-off
Same as 1 kHz
Same as 1 kHz
Same as 1 kHz
cardioid frequency response:
20–20,000 Hz
omni frequency response:
20–20,000 Hz
gure-of-eight frequency
response: 20–20,000 Hz
polar pattern
polar pattern
polar pattern
Externally polarized (DC bias) condenser
Cardioid, Omnidirectional, Figure-of-eight
20-20,000 Hz
80 Hz, 12 dB/octave
–42 dB (7.9 mV), re 1V at 1 Pa
120 ohms
149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal)
17 dB SPL
132 dB, 1 kHz at Max SPL
77 dB, 1 kHz at 1 Pa
11-52V DC, 4.7 mA typical
Polar selection; Flat, roll-off;
10 dB pad (nominal)
412 g (14.5 oz)
170.0 mm (6.69") long,
52.0 mm (2.05") maximum body diameter
Integral 3-pin XLRM-type
R5
AT8458 shock mount for
5
/
8
"-27
threaded stands;
5
/
8
"-27 to
3
/
8
"-16
threaded adapter; soft protective pouch
Element
Polar patterns
Frequency response
Low frequency roll-off
Open circuit sensitivity
Impedance
Maximum input sound level
Noise
1
Dynamic range (typical)
Signal-to-noise ratio
1
Phantom power requirements
Switches
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
Specications are subject to change without notice.
The microphone shall be 170.0 mm (6.69") long and have a maximum
body diameter of 52.0 mm (2.05"). Weight shall be 412 grams (14.5 oz).
The microphone shall include a shock mount and a soft protective pouch.
The Audio-Technica AT2050 is specied.
461