Specification

audio-technica phono cartridges guide - 2019/20 - 19
Moving coil phono cartridge for 78rpm mono Shellac SP record
The AT-MONO3/SP cartridge is designed to faithfully transcribe the performances
recorded on 78rpm Shellac records.
Made specifically for mono recordings, the cartridge only generates signal with
horizontal movement. However to produce a minimal wear on the groove, the
AT-MONO3/SP also has an adapted vertical compliance.
• Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking
ability.
•
T
he average usage time is 500 hours extending the life span of precious mono
recordings.
• High purity PCOCC allows a more transparent signal transmission oering a high
eciency and a high fidelity.
•
T
o support the internal mechanism, the body is made of solid die-cast aluminium
alloy, furthermore stiness is achieved with the addition of rigid synthetic resin to
hold the body.
AT‑MONO3/SP internal wiring
This schematic shows the internal wiring of
AT‑MONO3/SP featuring two horizontal voice coils
wired in series, resulting electrically as a single
mono voice coil. The mono signal is available from
white‑blue terminals, the same signal is also
available from red‑green terminals in order to feed
both inputs of a stereo phono preamp.
AT33MONO, AT-MONO3/LP and AT-MONO3/SP
are true mono cartridges due to the horizontal
configuration of the voice coils. The cartridge only
generates electrical signal with horizontal movement
due to the horizontal configuration of the coil.
2.5mil Bonded Conical Stylus
Round Shank
AT-MONO3/SP
High output moving coil cartridge
for 78rpm mono Shellac SP
(Standard Play) records
199,00 e
Including VAT
EAN 4961310008338