Technical data
7
1
2
3
5 6 12 8 9 10 11
4
7
1
2
3
4
5
6
7
8
9
10
11
12
13
ATCS-60MIC
ATCS-L60MIC
13
ATCS-M60 delegate unit (PC 491-MC 134)
Technical Data
ATCS -M60
Bandwidth
1 ~ 10MHz
Number of Channels
Voice 5 ch, monitor 4 ch and data 2 ch
Modulation Method
FM modulation
Infrared Data Communication
9,600 bps
Speaker Output
8 Ω, 2W
Headphone Output
Ø 3.5mm monaural mini-jack
Power Supply
Dedicated lithium-ion battery with 7.4 VDC, 2400 mAh or AC adaptor with 12 VDC, 1A
Standard Operation Time
Continuous speeches: 6 hr; Signal reception status: 10 hr.
Dimensions
H75.5 ×W187×D149mm
Weight
0.6 kg (microphone and battery excluded)
Optional Accessories
LI-240 lithium-ion battery, AC adaptor
Built-in speaker
•
Volume can be adjusted at the user’s discretion with the knob on the right of the main body. It can
be used even without acoustic equipment.
Simultaneous interpretation equipment for 4 languages
•
At an internationally oriented facility, it provides simultaneous interpretation for 4 languages and
can be used effectively in international meetings.
Simultaneous speech by up to 5 people
•
It is possible to have five people speaking at the same time. This is most helpful when several
people are giving presentations on the same topic.
Features of chairperson unit
Unit selection function
• Depending upon the application, the user may choose to set the ID of the chairperson unit as 001
and that of participants units as 002 and so on. If there is any malfunction in the chairperson unit,
a participant unit can replace the broken one simply by changing the participant unit’s ID to “001”.
This exi bility offers gre at p eace of mind.
All finish and speech prohibition function
• If the priority number is set during the conference, then it is possible to terminate all the units
making
or requesting to make a speech as a group, except for the chairperson unit, by simply pressing
and holding
the TALK (speech) button of the chairperson unit (ID001) for over two seconds. In addition,
holding the TALK button prohibits use of microphones other than the chairperson.
Light ring LED
The red light is on during speech.
It flashes rapidly in case of low battery.
Microphone
Selection may be made between the two models
according to usage and system requirements.
Power LED
The red light indicates the power supply is ON;
it flashes when the battery is low.
Loudspeaker
TALK (speech) LED
The green light is on when the microphone is in use
(during speech).
TALK (speech) button
A single simply designed button functions as the
microphone’s ON/OFF switch in the manual mode.
TALK (speech) button
Monitor change-over switch
Choose the output channel number ofthe earphone
terminals (1ch-4ch).
Earphone terminal
I/O terminal
Power switch
Bottom switch
The ID and IR output of Microphone
unit can be switched
AC adaptor jack
Consideration is given to its operation as
fixed equipment and also possibly as a
commercial power source.
Optional: AC adaptor