Infrared conference system - ATCS-60 Series
1 Infrared conference system Everything begins with Audio-Technica The infrared conference system developed by Audio-Technica offers all the advantages of infrared communication and features 100% wireless microphone units. As a result, it offers users more flexibility, with freedom to easily change microphone locations and system configurations. Even for a conference of over 100 participants, the preparation takes far less time and goes more smoothly.
IR conference system 2 infrared conference system ( PC 491-MC 134) As a pioneer of infrared systems Audio-Technica offers you peace of mind. 1996 - The arrival of 800MHz radio wireless products marked the beginning of Audio-Technica’s work with IR technology. Resulting in sales of the ATIR series infrared microphones. 2000 - The dawn of the 21st century saw the release of the ATCS-M50 as part of the ATCS-50 series, capable of handling up to 150 microphones.
infrared conference system ( PC 491-MC 134) 3 General features Flexible and easy modify • Microphone and camera settings can be controlled by a PC running the supplied software. The upgradable structure of the system makes it easier to adapt your conference setup. Unit selection function • By utilising ID switch methodology, the ATCS-60 guarantees prompt and responsive unit selection.
atcs-60 series 4 ATCS-M60 delegate unit ( PC 491-MC 134) Main features: • Microphones can turn on automatically when a voice is detected. • Unique DSP voice detection ignores the sound of rustling papers when using the automatic microphone mode. • A built-in loudspeaker and headphone output for personal amplification negates the need for an additional P.A. system . • It enables simultaneous speeches by up to 5 people.
ATCS-M60 delegate unit ( PC 491-MC 134) atcs-60 series 5 Built-in speaker • Volume can be adjusted at the user’s discretion with the knob on the right of the main body. It can be used even without acoustic equipment. Simultaneous interpretation equipment for 4 languages • At an internationally oriented facility, it provides simultaneous interpretation for 4 languages and can be used effectively in international meetings.
dedicated microphone unit 6 ( PC 491-MC 134) Maximum reduction of noise and vibration • The newly developed shock-mount double-gooseneck microphones can effectively reduce noise vibration caused by the movement of desks & chairs and footsteps. The microphones are available in two lengths – the standard length being suitable for conferences and the longer length being suitable for lectures.
ATCS-C60 master control unit atcs-60 series ( PC 491-MC 134) 7 ATCS-C60 Master control unit • The number of units with priority settings can be selected. • Option for FIFO “First In First Out” or FILO “First In Last Out” modes when selecting which order people speak. • Automatic mode and manual or traditional button press mode are both available. • Adjustable threshold setting for automatic mode. • Adjustable hold time for how long the microphone stays on after speaking.
atcs-60 series 8 infrared conference system ( PC 491-MC 134) ATCS-A60 IR transmitter/receiver unit • The ceiling or wall mounted antenna transceiver connects via 75 ohms BNC coaxial cable to the master control unit. Utilizing an automated gain gives the A60's greater IR performance.
infrared conference system atcs-60 series ( PC 491-MC 134) 9 ATCS-B60 Battery Charger • An intelligent quick-charger has 10 individual advanced monitor sockets, taking only 5 and a half hours for a full charge. LI-240 Lithium-ion battery • Exclusively manufactured high specification batteries especially designed for the ATCS-M60 system. Technical Data No. of Batteries Charged Charging Time Rating Capacity Power Supply Weight Accessories ATCS-B60 10 About 5.
atcs-60 series ATCS-C60 options software ( PC 491-MC 134) CONFERENCE MANAGER (dedicated software) 10 The software offers total control over the conference system including integration with video systems, speaker order,speech mode (FIFO and LIFO), number of speakers, holding time, individual volume, thresholds and a great deal more.
ATCS-C60 options software ( PC 491-MC 134) atcs-60 series 11 Camera control function and image switch function • It is possible to control cameras with RS232C signal. Upon registering the layout of microphone units and presetting the camera, it is possible to synchronize the two so that images of speakers will be automatically taken. Multiple cameras (depending upon each manufacturer’s requirements) can be used at the same time for easy filming within a large venue.
atcs-60 series ATCS-M60 system chart 12 ( PC 491-MC 134) The ATCS-M60 is equipped with earphone terminals and can be used as a simultaneous interpretation system for one mother tongue plus three foreign languages. The system chart here shows the example of one mother tongue plus one foreign language. Please contact us for details.
ATCS-M60 system chart atcs-60 series ( PC 491-MC 134) 13 The requirements include sending close-up images of the speakers during the video conference, video recording contents a board meeting, and transmitting the conference images via the Internet. And all those requirements can be easily achieved with the conference manager software (optional).
atcs-60 series key features 14 ATCS-60 Series ATCS-M60 World standard model Main feature FUNCTIONS PERIPHERALS Equipped with automatic functions, not need to push button Number of buttons 1 Speech button (for asking and finishing) Loudspeakers ● (Loudspeakers ON during speeches) Number of monitor 4ch Earphone outputs 1 (4ch selection type) Automatic functions ● (Can be set to the manual mode at front of ATCS-C60, and then set the threshold and holding time.
notes 15
notes 16
Tel. : + 44 (0) 113 277 1441 Fax : + 44 (0) 113 270 4836 e-mail for UK: sales@audio-technica.co.uk e-mail for Europe: sales@audio-technica-europe.com www.audio-technica.com ©2008 Audio-Technica Ltd - Printed in C.E.E. E&OE*: Specifications may be subject to change without notice.
