Owner's Manual

12
Connecting via Bluetooth
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the
product are paired, you do not need to pair them again. The product supports multipairing, in which a connection
history is saved.
However, in the following cases you will need to pair again even if the Bluetooth device was paired once:
If the product is deleted from the Bluetooth device’s connection history.
If the product is sent out for repair.
• When switching to a Bluetooth device, you may not be able
to pair because the previously connected Bluetooth device
cannot be disconnected. In such cases, place the headphones
into the charging case (with battery level remaining for the
case) and press and hold (about 6 seconds) the multifunction
buttons on both the R (right) and L (left) sides. The indicator
lamp lights in red. After lighting in red, the product will switch
to the “searching for devices” state and you will be able to pair
with your desired Bluetooth device.
About Qualcomm TrueWireless™ Stereo Plus
The product supports Qualcomm TrueWireless™ Stereo Plus, which reduces sound interruption and latency through
independent transmission on each side. This feature requires connection with a Bluetooth device that supports
Qualcomm TrueWireless™ Stereo Plus, such as a smartphone.