User's Manual

Connecting via Bluetooth wireless technology

To connect the product to a Bluetooth device, the product needs to pair (register) with the device.

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.

• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.

• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the

confirmation tone.

1. Starting with the product turned off, press and hold the power supply / control button (for about 3 seconds).

• The indicator lamp will light in white, and then ﬂash.

2. Use your Bluetooth device to begin the pairing process and search for the product.

When your Bluetooth device ﬁnds the product, “ATH-M50xBT2” will be displayed on the device.

• For information about using your Bluetooth device, refer to the device’s user manual.

• The product may be displayed as “ATH-M50xBT2”, “BLE_ATH-M50xBT2”, or both. If both are displayed, select

“ATH-M50xBT2”. If only one is displayed, select that one.

3. Select “ATH-M50xBT2” to pair the product and your Bluetooth device.

• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be

called a passcode, PIN code, PIN number, or password.

• The product sounds a conﬁrmation tone when pairing is complete.

• Pairing a second device or more may take some time because the product automatically

searches for previously connected Bluetooth devices. In such cases, wait until the indicator

lamp (p.12) indicates “Pairing”.

About pairing

When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the

product are paired, you do not need to pair them again.

However, in the following cases you will need to pair again even if the Bluetooth device was paired once:

• If the product is deleted from the Bluetooth device’s connection history.

• If the product is sent out for repair.

100%12:00

Bluetooth

ATH-M50xBT2