User Manual

6
Connecting via Bluetooth wireless technology
About pairing
Pairing a Bluetooth device
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired,
you do not need to pair them again.
However, you need to pair again in the following cases:
• If the product is deleted from the Bluetooth device’s connection history
• If the product is sent out for repair
• If 9 or more devices are paired
(This product can save the pairing information of up to 8 devices. If you attempt to pair a new device when 8 devices
have already been paired, the pairing information of the new device will overwrite the information of the device within
the 8 paired devices that has the oldest date and time for connection to the product.)
• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to pair correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, turn the power switch on.
• After the indicator lamp lights white, it begins to flash.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, "ATH-WS660BT" will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user
manual.
3. Select "ATH-WS660BT" to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
100%12:00
Bluetooth ON
ATH-WS660BT