User Manual

12
Using the product
Noise-cancelling function
The microphone built into the product detects ambient noise, and outputs a sound-cancelling signal to effectively reduce
noise. When you turn on the product, noise cancelling turns on automatically.
• When you use noise cancelling, the noise-cancelling indicator lamp lights in green.
• When connected via Bluetooth, you cannot turn off the noise-cancelling function.
Wired connection (playthrough function)
The product has a playthrough function that allows you to use it as portable headphones and play back music even
when there is no battery level. You can connect the connector plug of the included cable to the product’s connector
jack, and then connect the input plug into a portable audio player.
Connector jack
Connector plug
Portable audio
player, etc.
Input plug
• If there is battery level remaining, you can use the noise-cancelling function by turning on the product even when
using the playthrough function.
• There is a difference in volume when noise cancelling is on and off.
Reset function
If the product does not work or other malfunctions occur, refer to
“Charging the battery” (p.6) for information on inserting the USB
charging cable to provide power, and then do a reset.
Disconnecting and then reconnecting the USB charging cable will reset
the product and should resolve any problem you are experiencing. If the
problem persists, contact your local Audio-Technica dealer.
Resetting does not change any of your settings (pairing information,
volume setting, etc.).
Battery jack
Micro USB Type-B