Manualshelf

Other Content

ManualsBrandsAudio-Technica ManualsElectronicsAudio-Technica AT-LP120-USB Direct-Drive Professional Turntable (USB & Analog), Silver
1234
Finally, adjust the PHONO/LINE selector switch on the back of the turntable to set the proper
output. If the turntable is connected to a receiver or other device with a dedicated phono input,
move the switch to PHONO. If the turntable is connected to a sound card, powered speakers or
AUX-type inputs, set the selector to LINE, which will activate the turntable’s internal pre-amp.
If you are using the USB output to connect the turntable to a computer, the selector switch can be
set to either PHONO or LINE as the switch doesn’t affect USB output in any way.
You are now ready to use and enjoy your AT-LP120-USB. Just remember, if you change out the
cartridge, you will need to rebalance the tone arm and reset the tracking force.