600 Series Professional UHF Wireless Systems ATW-1661 UniPak™ Transmitter System ATW-1662 Handheld Dynamic Microphone System ATW-1663 Handheld Condenser Microphone System Installation and Operation
Professional UHF Wireless Systems Installation and Operation This device complies with EN300 422-1, EN301 489-09 (EMC) and EN60065. The ATW-R160, ATW-T161, ATW-T162 and ATW-T163 are intended to be used in all countries of the European Union. Please note : Frequency usage is different for each country. Your AudioTechnica agent will have all the necessary details on the available legal frequencies for your area. CAUTION! Electrical shock can result from removal of the receiver cover.
Receiver Installation Location For best operation the receiver should be at least 1 m above the ground and at least 1 m away from a wall or metal surface to minimise reflections. The transmitter should be at least 1 m from the receiver, as shown in Figure A. Keep antennas away from noise sources such as digital equipment, motors, automobiles and neon lights, as well as large metal objects. Output Connections There are two audio outputs on the back panel: balanced (32 mV) and unbalanced (52 mV).
Receiver Controls and Functions Front Panel Controls and Functions (Figure. B) 1. POWER SWITCH/INDICATOR: Press switch on, and the "Power" indicator will light. 2. LCD WINDOW: Liquid Crystal Display indicates control settings and operational readings. See Figure D for examples. 3. TUNER OPERATION INDICATOR: Indicates which Tuner (A or B) has the better reception and is in operation. 4.
Transmitter Setup Battery Selection and Installation Each transmitter uses two 1.5V AA batteries, not included. Alkaline type is recommended. Always replace both batteries. Make certain the transmitter power is Off before replacing batteries. UniPak™ Transmitter Battery Installation 1. Slide off the battery cover as shown in Figure E. 2. Observe correct polarity as marked inside the battery compartment, and carefully insert two fresh 1.5V AA alkaline batteries. 3. Replace the Battery cover (Figure.
System Operation Switch on the receiver. Do not switch on the transmitter yet. Receiver Squelch Selecting/Setting Frequency It’s usually best to start by setting the receiver’s frequency to determine there is no local interference on that frequency. Then, always make certain to set the transmitter to the receiver’s exact frequency. The receiver’s Tone Lock system squelches the audio only, permitting any RF energy on the frequency to show on the “RF” bar-meter.
System Operation Adjusting Input Level - Handheld Transmitter Unscrew the lower body cover and slide it downward, exposing the screwdriver and Trim control (Figure G and H). Remove the screwdriver and gently turn the Trim control marked "VR" (variable resistor) to its full counterclockwise position. While speaking /singing into the microphone at typically loud levels, carefully turn the VR control clockwise while watching the receiver’s AF Level indicator.
Specifications† OVERALL SYSTEM UHF Operating Frequency * Number of Channels Frequency Stability Modulation Mode Normal Deviation Operating Range Operating Temperature Range Frequency Response ATW-R160 RECEIVER Receiving System Image Rejection Signal-to-noise Ratio Total Harmonic Distortion Sensitivity Intermediate Frequency Audio Output Unbalanced: Balanced: Output Connectors Unbalanced: Balanced: Power Supply Dimensions Weight Accessories Included EX: 795.500 to 819.025 MHz UK: 840.125 to 864.
Optional System Accessories WIRELESS ESSENTIALS™ MICROPHONES AND CABLES All Wireless Essentials accessories are terminated for use with ATW-T1600 and other UniPak™ transmitters. AT829cW Miniature cardioid condenser lavalier microphone. Includes clothing clip and windscreen. MT830cW Subminiature omnidirectional condenser lavalier microphone. Includes clothing clip and windscreen. MT830cW-TH “Theatre” model, same as MT830cW except beige colour mic and cable for concealment.
Troubleshooting Guide Receiver is not on (LCD window does not light). • Receiver Power switch is not pressed in. • Small DC power cord from included in-line power supply is not plugged into jack on back of receiver. • The power supply is not plugged into AC power outlet. • AC power is not present at the AC outlet. Receiver is on (LCD window lights) • No sound: ✓“RF” and "AF" level meters both show good signals. • AF Level control on front of receiver not turned up (clockwise). [See p. 4.
ATW-1600 SERIES PROFESSIONAL UHF WIRELESS SYSTEM FOR USE IN THE UK Cannel No. Band 0 Co-ordinate 1 2 3 4 5 6 Shared 7 8 9 A B C De-regulated D E F Frequency (MHZ) 840.125 840.375 841.125 841.375 844.250 845.500 854.900 855.275 856.575 857.625 860.900 861.200 863.125 863.375 864.125 864.375 Group 1 O O O O O O O O 2 O O O O O O O O O Notes: Frequencies listed in Group 1 should be used for Open Frequency Scan Function.
ATW-1600 SERIES PROFESSIONAL UHF WIRELESS SYSTEM STATEMENT OF COMPLIANCE FOR USE IN THE UK Usage :The ATW-T161 and ATW-T162 are intended to be used in all countries of the European Union. Please note : Frequency usage is different for each country. Your Audio-Technica agent will have all the necessary details on the available legal frequencies for your area.
ATW-1600 SERIES PROFESSIONAL UHF WIRELESS SYSTEM FOR USE IN THE EU Band A B Cannel No. 0 1 2 3 4 5 6 7 8 9 A B C D E F Frequency (MHZ) 795.500 796.000 797.900 800.975 802.025 807.500 809.500 814.500 799.400 801.100 801.425 804,825 805.150 813.700 817.425 819.025 Group 1 O O O O O O O O 2 O O O O O O O O Operation of this system in France is restricted to Band A only. Notes: 1. Above two bands are designed for general use in EU countries. Usable spectrum can change from country to country.
ATW-1600 SERIES PROFESSIONAL UHF WIRELESS SYSTEM STATEMENT OF COMPLIANCE FOR USE IN THE EU Usage :The ATW-T161 and ATW-T162 are intended to be used in all countries of the European Union. Please note : Frequency usage is different for each country. Your Audio-Technica agent will have all the necessary details on the available legal frequencies for your area.
One-Year Limited Warranty Audio-Technica microphones and accessories purchased in the EU are warranted for one year from date of purchase by Audio-Technica Limited to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to Audio-Technica Limited, prepaid together with the proof of purchase.
Visit our Web Site! www.audio-technica.co.uk | | Audio-Technica Ltd. Email: sales@audio-technica.co.uk Web: www.audio-technica.co.uk Audio-Technica Europe A Division of Audio Technica Ltd. Email: sales@audio-technica-europe.com Web: www.audio-technica-europe.
