System 10 and System 10 PRO Components Digital Wireless Installation and Operation ATW-T1006 Boundary Microphone Transmitter ATW-T1007 Microphone Desk Stand Transmitter
ATW-T1006 and ATW-T1007 Installation and Operation CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. CERTIFICATION: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENSE-EXEMPT RSS STANDARD(S).
ATW-T1006 and ATW-T1007 Installation and Operation Installation Transmitter Location For best operation the ATW-T1006 boundary microphone transmitter or ATW-T1007 microphone desk stand transmitter should be kept at least 6' (2 m) from the System 10 receiver to help assure maximum RF performance. Power Connection NOTE: Use only the supplied AC adapter and power cord to power or charge the boundary and desk stand transmitters.
ATW-T1006 and ATW-T1007 Installation and Operation Transmitter Operation Press and hold the Power switch on the bottom of the transmitter. (The electronics in the transmitter take up to 30 seconds to stabilize after power is applied.) Both the ATW-T1006 boundary microphone transmitter and the ATW-T1007 microphone desk stand transmitter should be placed on a flat, unobstructed mounting surface. The ATW-T1006 should be positioned so the front of the microphone faces the sound source.
ATW-T1006 and ATW-T1007 Installation and Operation Setting the Switch Function 1. The default Switch Function setting is TOGGLE ON/OFF (with audio on at power up). The LED below the Switch Function button illuminates green for this setting. 2. Press the Switch Function button once to select MOM. ON (momentary on), wherein the audio will be on only while the user switch is being pressed (press to talk). The LED below the Switch Function button illuminates orange for this setting. 3.
ATW-T1006 and ATW-T1007 Installation and Operation System Frequencies For future reference, please record your system information here (the serial number appears on each transmitter). Transmitter Model ATW-T100 Serial Number 6 or 7 Specifications OVERALL SYSTEM Operating Frequencies Total Harmonic Distortion Operating Temperature Range Charging Temperature Range Frequency Response Audio Sampling 2.4 GHz ISM band (2400 to 2483.5 MHz) <0.
ATW-T1006 and ATW-T1007 Installation and Operation This page intentionally left blank.
ATW-T1006 and ATW-T1007 Installation and Operation Audio-Technica Corporation audio-technica.
