User Manual

10
Hold function
When you press and hold the control button and the volume button (+) simultaneously for about 2 seconds while using
the product, it will disable the buttons and prevent unintended operation.
• To deactivate this function, press and hold the control button and the volume button (+) again for about 2 seconds.
• You can still use telephone features, such as receiving and rejecting a call, while the hold function is enabled.
• You can also turn the power OFF with the hold function enabled. If you turn the power OFF or charge the battery, the
hold function will be disabled.
Status
Indicator lamp
White
Indicator lamp
Lamp
display
Pattern
Hold activated/
Hold disabled
Lit for 3 seconds
Auto power-off function
The product automatically turns OFF after 5 minutes of not being connected to a device or not being connected to
headphones while the power is turned ON.
Reset function
If the product does not work or other malfunctions occur, refer to
“Charging the battery” (p. 5) for information on inserting the USB charging
cable to provide power, and then do a reset.
Disconnecting and then reconnecting the USB charging cable will reset
the product and should resolve any problem you are experiencing. If the
problem persists, please contact your local Audio-Technica dealer.
Pressing the reset button does not change any of your settings (pairing
information, volume setting, etc.). *
*The SBC priority connection (p.12) is disconnected.
Using the product