User Manual

12
Troubleshooting
SBC priority connections (for when sound is delayed significantly)
When the connection codec is AAC, significant sound delays can be alleviated by changing the connection codec to
SBC, which comes standard with Bluetooth devices. *¹
Connecting to a SBC priority connection
When the pairing with a Bluetooth device has been completed
1. Turn the power ON while holding down the volume (-) button.
• After the settings are complete, this product will automatically be connected to the Bluetooth device for which
pairing was completed. *²
Before pairing with a Bluetooth device
1. Turn the power ON while holding down the volume (-) button.
• The indicator shows pairing in progress (searching for device).
2. Refer to Step 2 and 3 in “Pairing a Bluetooth device” (p.6) and start pairing your device.
• After pairing via an SBC priority connection is complete, the only available connection codec will be SBC.
Connections using other codecs will not be possible. *
3
• For details on the flashing and lit displays of the indicator lamps, refer to “Indicator lamp display” (p.13).
*1 Depending on the usage environment, changing to an SBC priority connection may not alleviate sound delays.
*2 If a connection is not made automatically, refer to “Pairing a Bluetooth device” (p.6) and perform pairing operations again.
*3 If you turn the power OFF and turn it back ON after 10 seconds, the normal connection will be restored, allowing you to use the other
codecs for connection. Please connect using an SBC priority connection when necessary.