User Manual

6
Connecting via Bluetooth wireless technology
About pairing
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired,
you do not need to pair them again.
However, you need to pair again in the following cases:
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• If you try to pair nine devices or more. (This product can save pairing information on up to eight devices total. If
you pair a new device after you have already paired eight devices, the pairing information of the device that was
connected first among the eight devices will be overwritten by the new device's information.)
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process by listening to the confirmation tone, wear headphones connected to
the product.
1. Starting with the product turned off, slide the power switch to the “ON” position.
• For details on the indicator lamp display during pairing (searching for device), see “Indicator lamp display” (p.13).
2. Use your Bluetooth device to begin the pairing process and search for the
product. When your Bluetooth device finds the product, “AT-PHA55BT” will be
displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user
manual.
3. Select “AT-PHA55BT” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
100%12:00
Bluetooth ON
AT-PHA55BT