User's Manual

How to Connect
English
ATH-CKS55XBT
Device
ON
* Read the user manual for the
Bluetooth
device.
* Place the
Bluetooth
device within 1 meter of the headphones to perform pairing correctly.
* Wear the headphones to conrm pairing by listening for sound.
How to Perform Pairing
1
Starting with the headphones turned off,
press and hold the Power button on the
Bluetooth transmitter/receiver for about 4
seconds.
The indicator will begin ashing red/blue.
3
When the headphones is searched for,
"ATH-CKS55XBT" will display on the Bluetooth
device.
Select "ATH-CKS55XBT" and register the device to
be connected.
Some devices may ask for pass key*.
In this case, enter "0000".
4
When the headphones rings, the pairing has
performed normally and been successfully
completed.
* The pass key is also called pass code, PIN code, PIN
number or password.
* For more information on how to use the
Bluetooth
device, read the operation manual for the
device.
2
Pairing process will begin and the Bluetooth device will search for the headphones.
Long press
Beep (Pipo Papo)
sound
♪
Short beep
♪
Select
8