User's Manual Part 1

6
EN
Connecting via
Bluetooth
®
wireless technology
About pairing
Pairing a Bluetooth device
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired,
you do not need to pair them again.
However, you will need to pair again in the following cases:
• If the product is deleted from the
Bluetooth device's connection history.
• If the product is sent out for repair.
• If the product is paired with 9 devices or more.
(The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices, pairing
information for the device with the oldest connection date will be overwritten by the information for the new device.)
• Read the user manual for the
Bluetooth device.
• Place the
Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for sound.
1. Starting with the product turned off, slide the power switch to the "ON" position.
• For information about how the indicator lamps indicate pairing (searching for devices), refer to "Indicator lamp
display" (p.12).
• The product beeps when pairing begins.
2. Use your
Bluetooth device to begin the pairing process and search for the product.
When your
Bluetooth device finds the product, "ATH-DSR9BT" will be displayed on the device.
• For information about using your
Bluetooth device, refer to the device's user manual.
3. Select "ATH-DSR9BT" to pair the product and your
Bluetooth device.
• Some devices may ask for a passkey. In this case, enter "0000". The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product beeps when pairing is complete.
ATH-DSR9BT
MY DEVICES
Settings Bluetooth
Bluetooth
Select
ATH-DSR9BT_Manual_Book.indb 6 2016/11/01 17:42