Datasheet

TLV320AIC3107

www.ti.com

SLOS545D –NOVEMBER 2008–REVISED DECEMBER 2014

6 Description (Continued)

Extensive register-based power control is included, enabling stereo 48-kHz DAC playback as low as 15 mW from

a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.

The high-power output drivers are capable of driving a variety of load configurations, including up to three

channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a

capacitorless output configuration. The mono class-D output is capable of differentially driving an 8-Ω speaker.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering

in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-

kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by

programmable gain amplifiers or AGC that can provide up to 59.5 dB analog gain for low-level microphone

inputs. The TLV320AIC3107 provides an extremely high range of programmability for both attack (8-1,408 ms)

and for decay (0.05-22.4 seconds). This extended AGC range allows the AGC to be tuned for many types of

applications.

For battery saving applications where neither analog nor digital signal processing are required, the device can be

put in a special analog signal passthru mode. This mode significantly reduces power consumption, as most of the

device is powered down during this pass through operation.

The serial control bus supports I

C protocol, while the serial audio data bus is programmable for I

S, left/right-

justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support

for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special

attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC3107 operates from an analog supply of 2.7 V–3.6 V, a digital core supply of 1.65 V–1.95 V, a

digital I/O supply of 1.1 V–3.6 V, and a speaker amplifier supply of 2.7V–5.5V. The device is available in the 5 ×

5-mm, 40-pin QFN package and in the future a 3.5 × 3-mm, 42-lead DSBGA package.

The record path of the TLV320AIC3107 contains integrated microphone bias, digitally controlled stereo

microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog

inputs. Programmable filters are available during record which can remove audible noise that can occur during

optical zooming in digital cameras. The playback path includes mix/mux capability from the stereo DAC and

selected inputs, through programmable volume controls, to the various outputs.

The TLV320AIC3107 contains three high-power output drivers as well as two single-ended line output drivers,

and a differential class-D output driver.

Product Folder Links: TLV320AIC3107