Specifications
14
A
UDIOACCESS
Zone Setup
Zone setup is accomplished as described in the PX-600 Installation Manual, with the
following change:
All zone names default to ZN#__MAIN, however you may manually name each main room
to reflect its primary function.
1. Select ZONE SETUP from the MAIN MENU.
2. Select a ZONE.
3. Select NAME.
4. Use
▲ and ▼ to select letters and numbers to designate a name for this zone. Press
ENTER after each character.
5. Continue as described in the PX-600 Installation Manual.
6. Repeat above steps for each main room as needed.
Notes on Zone Setup
• Any, all or none of the programming steps may be done for each main room. You may exit
at any time by pressing ENTER while the word EXIT is highlighted.
• The ZONE OUTPUTS are permanently fixed at the unity gain level. Volume control is
accomplished in the PX-603.
Group Setup
Use GROUP SETUP to set ALL-ON groups and TIME-OUT MODE. ALL-ON is a feature
that allows you to organize PX-600 main rooms and PX-603 rooms into groups that can be
turned on and operated together. This is most often used for party situations or any time
background music is desired throughout the house. Assign PX-600 zones to group A, B, C or
N for none; PX-603 rooms may be selected to come on with the ALL-ON group or not.
PX-603 rooms may not however, be assigned to a group independent of the main room.
ALL-ON for a group is initiated, with the room off, by pressing and holding the ON button
on a KPS keypad, KP3 keypad or IR remote.
Once you have assigned zones to groups, select one of three ways that the ALL-ON feature can
work for all the groups in the system as described in the PX-600 Installation Manual.
Group Setup Programming Instructions:
1. Select GROUP SETUP. Press ENTER.
2. Assign zones to groups as described in the PX-600 Installation Manual.
3. When you have all the zones assigned to the groups you want, highlight EXIT and press
ENTER.
4. As you exit the GROUP SETUP screen, the TIME-OUT MODE options will appear as
discussed in the PX-600 Installation Manual. TIME-OUT features are the same for the
PX-603 rooms as noted in the PX-600 Installation Manual.