Specifications

Securing the Speaker

Once you have tested your system and confirmed that it is operating properly, turn off your system and

prepare for the final mounting of the speakers.

1) Position the speaker into the mounting hole and confirm the correct mounting location and hole

placement. Screw clips are provided to insure a snug fit. Place crew clips over the metal surface

and line up the hole with the hole you have previously drilled. Place the speaker into the hole. Align

the mounting holes and proceed to insert the screws. Be sure to tighten the screws evenly as

not to warp the speaker frame.

2) Turn your system back on to confirm the speakers proper operation. First test at low volume and

then you may steadily increase the volume as desired

Securing the Speaker