Specifications

Contents of Carton

Flame Grill

Installation & Operation Manual

Warranty Card

Sticker

Dog Tag

1. Make sure to carefully read and understand the instructions before

attempting to install your new Audiobahn tube.

2. Before making any electrical connection, make sure that you disconnect

the battery's ground cable to prevent the possibility of short circuit or damage

to your electronic equiptment.

3. For easier assembly, we suggest you run all wires prior to mounting your

amplified tube.

4. Route all of the RCA cables close together, and away from any power

wires.

5. Use high quality connectors that can be found in the Audiobahn

Connections catalog. This will minimize signal and power loss.

6.Think before you drill! Be careful not to cut or drill into gas tank, fuel lines,

brake or hydraulic lines, vacuum lines, or electrical wiring when working on

any vehicle.

7. Avoid running wires over or through sharp edges. Use rubber or plastic

grommets to protect any wires routed through metal, especially the firewall.

8. ALWAYS protect the battery and electrical system from damage with proper

fusing.

9. When grounding to the chassis of the vehicle, scrape all paint from the

metal to ensure a good clean ground connection. Grounding connections

should be as short as possible, and always be connected to metal that is

welded to the main body or chassis of the vehicle.

Contents of Carton