Specifications

Troubleshooting
8
�
If you start having problems with distorted sound or loss of
performance after installing your subs in your empty enclosure, you can
follow the instructions below to try and locate what is causing the problem.
� 1) If you have any distorted sound, loss of performance, or rattling from your subs,
check the connections running from your amplifier or other processor to the box. You wil
l also
want to check the connections inside the box to make sure no wires have become unhooked �
or are loose.
� 2) If the above does not solve the problem, check your enclosure thoroughly to see if
there are any leaks, cracks, or broken pieces. Any loss of structural integrity of your enclosure
can cause significant performance loss and distortion.
� 3) The next step you can take is to remove the subs and look for any burned wire
leads or separated components. Sometimes when you play subs too hard for too long, they will
start to heat up.
� 4) If none of the above steps solve the problem, you will want to start looking at the
other components in the vehicle. Start by checking all connections to and from the box,
amplifier, source unit, or any other processors you may be using. You will need to r
eference to
that particular manufacturer for any setting configurations or �troubleshooting.