Owner`s manual

Contents of Carton

• AmpliedSubwooferwithFlame

GrillInstallation & Operation

Manual

• Warranty CardPower Cable with

Fuse and Ring Terminal

• Ground Wire with Ring Terminal

• HeatShrinkandZipTies

• 18GaugeRemoteTurnonWire

• BassKnobwithCord

• 1Fuse

• HighLevelInputHarness

StickerDogTag

1. Make sure to carefully read and understand the instructions before attempting

to install your new Audiobahn tube.

2. Before making any electrical connection, make sure that you disconnect the

battery’s ground cable to prevent the possibility of short circuit or damage to

your electronic equiptment.

3. For easier assembly, we suggest you run all wires prior to mounting your am-

pliedtube.

4. Route all of the RCA cables close together, and away from any power wires.

5. Use high quality connectors that can be found in the Audiobahn Connections

catalog. This will minimize signal and power loss.

6. Think before you drill! Be careful not to cut or drill into gas tank, fuel lines,

brake or hydraulic lines, vacuum lines, or electrical wiring when working on

any vehicle.

7. Avoid running wires over or through sharp edges. Use rubber or plastic grom-

metstoprotectanywiresroutedthroughmetal,especiallytherewall.

8. ALWAYS protect the battery and electrical system from damage with proper

fusing.

9. When grounding to the chassis of the vehicle, scrape all paint from the metal

to ensure a good clean ground connection. Grounding connections should be

as short as possible, and always be connected to metal that is welded to the

main body or chassis of the vehicle.