Owner`s manual

Operation

REMOTE BASS BOOST KNOB

Mounting and Installation

1. Usingthescrewsprovidedwiththekit,ndalocationunderthedash,centerconsole,

or a place that gives easy access to the remote bass boost knob.

2. Plug in the supplied cord into the back of the bass boost knob.

Adjusting the Gain

Toadjustthegainsetting,rstturntheampliergainallthewaydown.Thenturnthe

source volume up until distortion is audible, and then turn it down until distortion is inaudi-

ble.Next,turntheampliergainsettinguntilonceagaindistortionisaudible,andthenback

it down until distortion is inaudible.

Adjusting the Crossover

Turnthecrossoveradjustmentallthewaydownto40Hz.Thenslowlyturntheknobup

untilldesiredsoundisachieved.Normallisteninglevelshouldberightaround100Hzto

150Hz.Usecommonsensewhenadjustingyourcrossover.