User Guide

General Operation
18
TURN THE UNIT ON
After all connections are completed
correctl
y, press the (PWR) button on the
front
panel or (POWER) on the remote
control
to turn on the power. When the unit
is
on, it will search the disc automatically. If
there
is a disc in the disc slot, the unit will
start
playback automatically. Besides this,
you
should turn on the monitor that
connected
to the player.
Standby State
1)
When the unit is on, press (PWR)
on
the front panel or (POWER) on
the
remote control to turn the unit off
te
mporarily, in order to stop the
playback
in a short time and the unit
goes
into standby state.
2)
In standby state, press (PWR) on the
front
panel or (POWER) on the
re
mote control again to recall playback.
And
for disc playback, it can realize
memory play function.
Note
: The unit has screen saver function
(select
“ON” in Screen Saver setup). If the
playback is stopped and there is not any
button
operation in 5 minutes, it will activate
the
screen saver function automatically;
when any button for DVD function is
pressed,
the screen saver function will
release
automatically.
Remote Sensor (IR)
Point the remote handset to the remote
sensor IR on the front panel. Receive the
signal
from the remote handset.
Loading a Disc
1. Insert the disc with printed side facing up
into
the disc slot.
2.
The player will start playback
auto
matically.
Ejecting a Disc
Pres
s (EJ) button on the front panel or on
the
remote control to eject the disc.
BASIC PLAY
Stopping Playback
- Briefly press (Stop) button to
pre-stop
the unit playback. When
button on the front panel or (Play)
button
on the remote control is pressed,
nor
mal playback will continue.
- Press (Stop) button twice to stop the
playback and go back to the DVD
LOGO.
Pausing Play/
Step Play
Pressing on the remote control for the
first
time or pressing on the front panel
during
playback will stop playback
te
mporarily. To return to normal playback,
press on the remote control or on
the
front panel.
If you play a DVD/VCD/SVCD, press
on
the remote control again to stop at the next
picture
(step function). If you play a
CD
/MP3/Picture CD, pressing on the
re
mote control again is ineffective.
Rapid For
ward / Rapid Reverse
Pres
s & during playback.
Each
time the button is pressed, the speed of
rapid
forward /reverse changes according to
the disc as follows.
D isc slot Eject button