Owner`s manual

OSD for AVM104IRV
12
1. Press "Power" on the monitor or remote to turn on the monitor.
2. Press "Mode" on the monitor or remote to display the on screen adjustment menu as shown
below:
Color OSD Miscellaneous Exit
3. Press "UP" or "DOWN" on the monitor or remote to select the setting to adjust. Then press
"Mode" to confirm the selection or adjustment. Each adjustment item is shown as below:
The Color selection opens a submenu with additional adjustable parameters. Selecting Color
reveals the following screen:
Contrast
Brightness
HUE
SATURATION
EXIT
Use UP or DOWN to increase and decrease the selected parameter value from 0 - 255
The OSD selection opens a submenu with additional adjustable parameters. Selecting OSD
reveals the following screen:
Language
OSD H. Position
OSD V. POSITION
OSD Timer
Translucent
Language: After selecting Language by using the Mode button, use UP or DOWN to change
the language selection between English, *****, and *****.
OSD H. Position: After selecting OSD H. Position by using the Mode button, use UP or DOWN
to change the horizontal positioning of the OSD.
OSD V. Position: After selecting OSD V. Position by using the Mode button, use UP or DOWN
to change the vertical positioning of the OSD.
OSD Timer: After selecting OSD Timer by using the Mode button, use UP or DOWN to turn
the timer on or off.
ON - After 5 seconds of no selections being made, the OSD will disappear
OFF - The OSD will appear all the time