Owner`s manual
TROUBLESHOOTING
10
If you start having problems with distorted sound or loss performance after installing
your subs, you can follow the instructions below to try and locate what is causing the
problem.
1. If you have any distorted sound, loss of performance, or rattling from your subs,
check the connections running from your amplier or other processor to the box. You
will also want to check the connections inside the box to make sure no wires have
become unhooked or are loose.
2. If the above does not solve the problem, check your enclosure thoroughly to see if
there are any leaks, cracks, or broken pieces. Any loss of structural integrity of your
enclosure can cause signicant performance loss and distortion.
3. The next step you can take is to remove the subs and look for any burned wire leads
or separated components. You can normally smell something burning when a sub
blows or is going bad. Sometimes when you play subs to hard for too long, they will
start to heat up.
4. If none of the above steps solve the problem, you will want to start looking at the
other components in the vehicle. Start by checking all connections to and from the
box, amplier, source unit, or any other processors you may be using. You will need
to reference to that particular manufacturer for any setting congurations or trouble-
shooting.