Specifications

Troubleshooting

If you start having problems with distorted sound or loss

performance after installing your subs, you can follow the

instructions below to try and locate what is causing the

problem.

1) If you have any distorted sound, loss of performance,

or rattling from your subs, check the connections

running from your amplifier or other processor to the

box. You will also want to check the connections inside

the box to make sure no wires have become unhooked

or are loose.

2) If the above does not solve the problem, check your

enclosure thoroughly to see if there are any leaks,

cracks, or broken pieces. Any loss of structural integrity

of your enclosure can cause significant performance

loss and distortion.

3) The next step you can take is to remove the subs and

look for any burned wire leads or separated

components. You can normally smell something

burning when a sub blows or is going bad. Sometimes

when you play subs to hard for too long, they will start

to heat up.

4) If none of the above steps solve the problem, you will

want to start looking at the other components in the

vehicle. Start by checking all connections to and from

the box, amplifier, source unit, or any other processors

you may be using. You will need to reference to that

particular manufacturer for any setting configurations or

troubleshooting.