User`s manual

Version 5.4 215 May 2008
SIP User's Manual 3. Web-Based Management
¾ To configure Tel Profiles, take these 9 steps:
1. Open the 'Tel Profile Settings' page (Configuration tab > Protocol Configuration
menu > Profile Definitions submenu > Tel Profile Settings page item).
Figure 3-84: Tel Profile Settings Page
2. From the 'Profile ID' drop-down list, select the Tel Profile identification number you
want to configure.
3. In the 'Profile Name' field, enter an arbitrary name that enables you to easily identify
the Tel Profile.
4. From the 'Profile Preference' drop-down list, select the priority of the Tel Profile, where
'1' is the lowest priority and '20' is the highest. If both IP and Tel profiles apply to the
same call, the coders and other common parameters (noted by an asterisk in the
description of the parameter TelProfile) of the preferred Profile are applied to that call.
If the Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.