User`s manual

Version 5.4 23 May 2008
SIP User's Manual 2. Configuration Concepts
2 Configuration Concepts
You can configure the device's parameters (including upgrading the software, and
uploading configuration and auxiliary files), using the following tools:
 An HTTP-based Embedded Web Server (Web interface), using any standard Web
browser (described in ''Web-based Management'' on page 25).
 A configuration file referred to as the ini file (refer to ''ini File Configuration'' on page
291).
 Command Line Interface - CLI (refer to the Product Reference Manual).
 Simple Network Management Protocol (SNMP) browser software (refer to the Product
Reference Manual).
 AudioCodes’ Element Management System (refer to AudioCodes’ EMS User’s Manual
or EMS Product Description).
Note: To initialize the device by assigning it an IP address, a firmware file (cmp),
and a configuration file (ini file), you can use AudioCodes' BootP/TFTP utility,
which accesses the device using its MAC address (refer to the Product
Reference Manual).