User`s manual

Version 5.4 241 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Default Call Priority
[SIPDefaultCallPriority]
Defines the default call priority for MLPP calls.
 [0] 0 = ROUTINE (default)
 [2] 2 = PRIORITY
 [6] 6 = IMMEDIATE
 [8] 8 = FLASH-OVERRIDE
 [9] 9 = FLASH-OVERRIDE-OVERRIDE
If the incoming SIP INVITE request doesn't contain a valid priority
value in the SIP Resource-Priority header, the default value is
used in the Precedence IE (after translation to the relevant ISDN
Precedence value) of the outgoing PRI SETUP message.
If the incoming PRI SETUP message doesn't contain a valid
Precedence Level value, the default value is used in the Resource-
Priority header of the outgoing SIP INVITE request. In this
scenario, the character string is sent without translation to a
numerical value.
MLPP DiffServ
[MLPPDiffserv]
Defines the DiffServ value (differentiated services code point --
DSCP) used in IP packets containing SIP messages that are
related to MLPP calls.
The valid range is 0 to 63. The default value is 50.