User`s manual

Version 5.4 243 May 2008
SIP User's Manual 3. Web-Based Management
ini File Field Name
Web Parameter Name
Valid Range and Description
NetAnn Announcement ID
[NetAnnAnncID]
NetAnn identification string (up to 16 characters) for playing an
announcement using the NetAnn interface. The application server sends
a regular SIP INVITE message with a SIP URI that includes this identifier
string and a “play=” parameter that identifies the necessary
announcement.
The default value is ‘annc’.
Example 1: INVITE sip: annc@10.2.3.4;play=http://localhost/1.
Example 2: INVITE sip:
annc@10.2.3.4;play=http://10.2.3.4/Annc/hello.wav.
MSCML ID
[MSCMLID]
Media Server Control Markup Language (MSCML) identification string (up
to 16 characters). To start an MSCML session, the application server
sends a regular SIP INVITE message with a SIP URI that includes this
string.
The default value is ‘ivr’.
For example: INVITE sip:ivr@10.2.3.4
Subsequent INFO messages carry the requests and responses.
Transcoding ID
[TranscodingID]
Transcoding identification string (up to 16 characters) used for identifying
an incoming Transcoding call.
The default value is ‘trans’.
For detailed information on Transcoding, refer to ''NetAnn Interface'' on
page 483.
Conference
Conference ID
[ConferenceID]
Conference Identification string (up to 16 characters).
The default value is ‘conf’.
For example: ConferenceID = MyConference
Note: To join a conference, the INVITE URI must include the Conference
ID string, preceded by the number of the participants in the conference,
and terminated by a unique number.
For example: Invite sip:4MyConference1234@10.1.10.10.
INVITE messages with the same URI join the same conference.
Beep on Conference
[BipOnConference]
Determines whether or not a beep is played when a participant joins or
leaves a conference (in the latter case, a beep of a different pitch is
heard).
 [0] Disable = Beep is disabled.
 [1] Enable = Beep is enabled (default).
Enable Conference DTMF
Clamping
[EnableConferenceDTMF
Clamp]
Determines the device logic once a DTMF is received on any conference
participant. If enabled, the DTMF is not regenerated toward the other
conference participants. This logic is only relevant for simple conferencing
(NetAnn).
 [0] Disable = Disable
 [1] Enable = Enable (default)
Enable Conference DTMF
Reporting
[EnableConferenceDTMF
Reporting]
Determines the device logic once a DTMF is received on any conference
participant. If enabled, the device reports this DTMF in an out-of-band SIP
message (according to TxDTMFOptions). This logic is only relevant for
simple conferencing (NetAnn).
 [0] Disable = Disable (default)
 [1] Enable = Enable