User`s manual

SIP User's Manual 248 Document #: LTRT-83303
Mediant 1000 & Mediant 600
Parameter Description
RADIUS Accounting Type
[RADIUSAccountingType]
Determines when the RADIUS accounting messages are sent to the
RADIUS accounting server.
 [0] At Call Release = Sent at call release only (default).
 [1] At Connect & Release = Sent at call connect and release.
 [2] At Setup & Release = Sent at call setup and release.
AAA Indications
[AAAIndications]
Determines the Authentication, Authorization and Accounting (AAA)
indications.
 [0] None = No indications (default).
 [3] Accounting Only = Only accounting indications are used.
3.4.6.3 Configuring the FXO Parameters
The 'FXO Settings' page allows you to configure the device's specific FXO parameters.
Note: The 'FXO Settings' page is only available for the FXO interfaces and
applicable to Mediant 1000.
¾ To configure the FXO parameters, take these 4 steps:
1. Open the 'FXO Settings' page (Configuration tab > Advanced Applications menu >
FXO Settings page item).
Figure 3-100: FXO Settings Page
2. Configure the FXO parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.