User`s manual

Version 5.4 253 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
TDM Bus PSTN Auto Clock
Reverting
[TDMBusPSTNAutoClockReve
rtingEnable]
Enables or disables the PSTN trunk auto-fallback reverting feature.
If enabled and a trunk returning to service has an
AutoClockTrunkPriority parameter value (refer to ''Configuring the
Trunk Settings'' on page 96) that is higher than the priority of the
local reference trunk (set in the TDMBusLocalReference parameter),
the local reference reverts to the trunk with the higher priority that
has returned to service for the device's clock source.
 [0] Disable (default)
 [1] Enable
Note: This parameter is applicable only when the
TDMBusPSTNAutoClockEnable parameter is set to 1.
TDM Bus Clock Source
[TDMBusClockSource]
Selects the clock source to which the device synchronizes.
 [1] Internal = Generate clock from local source (default).
 [4] Network = Recover clock from PSTN line.
For detailed information on configuring the device's clock settings,
refer to ''Clock Settings'' on page 459.
3.5 Management Tab
The Management tab on the Navigation bar displays all menus related to device
management. These menus appear in the Navigation tree and include the following:
 Management Configuration (refer to ''Management Configuration'' on page 253)
 Software Update (refer to ''Software Update'' on page 266)
3.5.1 Management Configuration
The Management Configuration menu allows you to configure the device's management
parameters. This menu contains the following page items:
 Management Settings (refer to ''Configuring the Management Settings'' on page 254)
 Regional settings (refer to ''Configuring the Regional Settings'' on page 261)
 Maintenance Actions (refer to ''Maintenance Actions'' on page 262)