User`s manual

SIP User's Manual 254 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.5.1.1 Configuring the Management Settings
The 'Management Settings' page allows you to configure the device's management
parameters.
¾ To configure the Management parameters, take these 4 steps:
1. Open the 'Management Settings' page (Management tab > Management
Configuration menu > Management Settings page item).
Figure 3-102: Management Settings Page
2. Configure the Management Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.