User`s manual

Version 5.4 345 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
TerminationSide_x
Same as the description for parameter TerminationSide, but for a specific
trunk ID (x = 0 - 3).
ClockMaster
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
ClockMaster_x
Same as the description for parameter ClockMaster, but for a specific
trunk ID (x = 0 - 3).
TDMBusClockSource
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
TDMBusPSTNAutoClock
Enable
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
TDMBusLocalReference
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
AutoClockTrunkPriority
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
TDMBusPSTNAutoClock
RevertingEnable
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
LineCode
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
LineCode_x
Same as the description for parameter LineCode, but for a specific trunk
ID (x = 0 - 3).
EnableCallingPartyCateg
ory
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 235.
BChannelNegotiation
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 235.
NFASGroupNumber_x
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
DChConfig_x
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
ISDNNFASInterfaceID_x
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
CASTableIndex_x
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
CASFileName_0
CASFileName_1
CASFileName_7
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with one or
more of the device trunks using the parameter CASTableIndex_x.
CASTablesNum
1 to 8. Indicates how many CAS protocol configurations files are loaded.
IdleABCDPattern
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
IdlePCMPattern
For a description of this parameter, refer to ''Configuring the TDM Bus
Settings'' on page 251.
LineBuildOut.Loss
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.