User`s manual

SIP User's Manual 524 Document #: LTRT-83303
Mediant 1000 & Mediant 600
 USB cable (not supplied) to connect the external USB CD ROM to the Mediant 1000
 RS-232 cable (supplied)
 Linux
TM
Distributions Installation CDs
 Blank CD or DVD media
 Windows
TM
PC with CD RW or external CD ROM/RW
14.1.2 Software
The software requirements include the following:
 RS-232 console / terminal software (e.g., HyperTerminal
TM
)
 ISO Image Editor (WinISO
TM
is recommended -- refer to
http://www.winiso.com/download.htm
UNIX
TM
File Format text editor (refer to
http://www.pspad.com
r http://www.ultraedit.com
14.2 Cabling
The following procedure describes the cabling before installing Linux
TM
operating system on
the Mediant 1000 OSN Server.
¾ To cable the OSN Server for installing the Linux
TM
operating
system, take these 4 steps:
1. On the Mediant 1000 CM module (located on the front panel), perform the following:
a. Connect the RS-232 port to a PC, using the RS-232 cable.
b. Connect the USB port to an external CD-ROM drive, using the USB cable.
Figure 14-1: Mediant 1000 Front Panel OSN Server Connections
2. On the Mediant 1000 iPMX module (located on the rear panel), connect the RJ-45
Ethernet port, using the Ethernet cable.