User`s manual

SIP User's Manual 562 Document #: LTRT-83303
Mediant 1000 & Mediant 600
Function Specification
Modem Transparency
Automatic switching to PCM or ADPCM on V.34 or V.90 modem
detection
Automatic switching (pass-through) to PCM, ADPCM or NSE bypass
mode for modem signals (V.34 or V.90 modem detection)
Protocols
VoIP Signaling
Protocol
SIP RFC 3261
Communication
Protocols
RTP/RTCP packetization
RTCP-XR
IP stack (UDP, TCP, and RTP)
Remote software upload (TFTP, HTTP and HTTPS)
Telephony Protocols
PRI (ETSI Euro ISDN, ANSI NI2, 4/5ESS, DMS 100, QSIG, Japan
INS1500, Australian Telecom, New Zealand Telecom, Hong Kong
Variant, Korean MIC)
VN,3VN4,VN6
E1/T1 CAS protocols: MFC R2, E&M wink start
BRI protocols: ETSI 5ESS, QSIG over BRI
Immediate start, delay start, loop start, ground start
Feature Group B, D for E1/T1
In-Band Signaling
DTMF (TIA 464A)
MF-R1, MFC R2
User-defined Call Progress Tones
Line Signaling
Protocols
Loop-start and ground-start signaling
CPU
Network Interface
Two Ethernet 10/100Base-TX ports (RJ-45)
RS-232 Interface
RS-232 terminal interface (non-standard RS-232 connector)
Reset
Reset button for hardware reset
Dry Contact
NB (Night Bell) and paging
Audio I/O
MOH (Music on Hold) and paging
Physical
Dimensions (W x H x
D)
482.6 mm (19”) x 1U x 350.5 mm (13.8”)
Weight
Approx. 5 kg (depending on number of installed modules)
Supply Voltage and
Power Consumption
Universal 100 - 240 VAC; 50 - 60 Hz; 1A max.
Environmental
Operational: 0 to 45°C (32 to 113°F)
Storage: -10 to 70°C (14 to 158°F)
Humidity: 10 to 90% non-condensing
Installation
Standard 19-inch rack mount or shelf mount