User`s manual

Version 5.4 71 May 2008
SIP User's Manual 3. Web-Based Management
3.4.1.3 Configuring the Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Telnet.
¾ To configure the Application settings parameters, take these 4
steps:
1. Open the 'Application Settings' page (Configuration tab > Network Settings menu >
Application Settings page item).
Figure 3-44: Application Settings Page
2. Configure the Applications parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 265.