Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 119
2 Configure:
c Destination prefix = 9*
d Prefix to Add = 303583 (adds a 6 digit prefix to the existing 4 digit extension of the
phone)
3 Submit and Burn.
Resetting the Mediant Gateway
Clearing the configuration
Manual method
If you have a situation where the box completely freezes, you can reset it to factory defaults by
inserting a paperclip in the tiny hole on the CPU board. Hold it in for about 6 seconds until the
LAN LED starts blinking and then release the clip. The box will reboot and search for a new ini
file.
Software method
You may also reset the Mediant Gateway’s configuration by loading an empty board.ini file,
using the Web interface. The only settings that are not restored to default using this method are
the management (OAMP) LAN IP address, the Default Gateway address, and the Web
interface's login user name and password.
How to prepare an empty .ini file:
The ini file to be loaded must be empty (i.e., contain no parameters) or include comment signs
(i.e., semicolons ";") preceding lines (parameters). One method to create this file:
1 Open a new notepad doc, do not type anything into it as text.
2 Save the document, naming it empty.ini. The result should be a 0kb file named
empty.ini
To restore defaults using the Web interface:
1 Prepare an empty ini file (empty.ini) and save it in a folder on your PC.