User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 218 Document #: LTRT-68805
Table 8-2: Supported CDR Fields (continues on pages 217 to 218)
Field Name Description
ReleaseTime Call Release Time
RTPdelay RTP Delay
RTPjitter RTP Jitter
RTPssrc Local RTP SSRC
RemoteRTPssrc Remote RTP SSRC
RedirectReason Redirect Reason
TON Redirection Phone Number Type
NPI Redirection Phone Number Plan
RedirectPhonNum Redirection Phone Number
8.9 Supported RADIUS Attributes
Use Table 8-3 below for explanations on the RADIUS attributes contained in the
communication packets transmitted between the gateway and a RADIUS Server.
Table 8-3: Supported RADIUS Attributes (continues on pages 218 to 219)
Attribute
Number
Attribute Name
VSA
No.
Purpose
Value
Format
Sample
AAA
1
Request Attributes
1
User-Name
Account number or calling
party number or blank
String
up to 15
digits
long
5421385747
Start Acc
Stop Acc
4
NAS-IP-
Address
IP address of the requesting
AudioCodes gateway
Numeric
192.168.14.
43
Start Acc
Stop Acc
6
Service-Type
Type of service requested
Numeric
1: login
Start Acc
Stop Acc
26
h323-incoming-
conf-id
1
H.323/SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
h323-remote-
address
23
IP address of the remote
gateway
Numeric
Stop Acc
26
h323-conf-id
24
H.323/SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
h323-setup-
time
25
Setup time in NTP format 1
String
Start Acc
Stop Acc
26
h323-call-origin
26
The call’s originator:
Answering (IP) or Originator
(PSTN)
String
Answer,
Originate
etc
Start Acc
Stop Acc
26
h323-call-type
27
Protocol type or family used
on this leg of the call
String
VoIP
Start Acc
Stop Acc
26
h323-connect-
time
28
Connect time in NTP format
String
Stop Acc
26
h323-
disconnect-time
29
Disconnect time in NTP
format
String
Stop Acc
26
h323-
disconnect-
cause
30
Q.931 disconnect cause
code
Numeric
Stop Acc
1
The values in column ‘AAA’ are as follows:
’Start Acc’ - Start Accounting
’Stop Acc’ - Stop Accounting