User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
SIP User's Manual 12. Special Applications
Version 5.0 273 October 2006
Table 12-2: SIGTRAN Interface Groups (continues on pages 272 to 273)
ini File Parameter Name Description
SS7_SIG_BEHAVIOUR
[Group Behavior Field]
Determines the SIGTRAN group behavior bit.
The valid range is 0 to 0xFFFFFFFE.
The default value is 0.
SS7_LOCAL_SCTP_PORT
[Group Local SCTP Port]
Determines the SIGTRAN group SCTP port.
The valid range is 0 to 0xFFFE.
The default value is 0Xfffe.
SS7_SIG_NETWORK
[Group Network Variant]
Determines the SIGTRAN group Network (ITU, ANSI, CHINA).
The valid range is 1 to 3.
The default value is 1.
SS7_DEST_SCTP_PORT
[Group Destination SCTP Port]
Determines the SIGTRAN group destination SCTP port.
The valid range is 0 to 0xFFFE.
The default value is 0xFFFE.
SS7_DEST_IP
[Group Destination SCTP IP]
Determines the SIGTRAN group destination IP Address
The valid range is 0 to 0xFFFFFFFE.
The default value is 0.
SS7_MGC_MX_IN_STREAM
[Inbound Streams Number]
Determines the SIGTRAN group maximum inbound stream.
The valid range is 2 to 0xFFFE.
The default value is 2.
SS7_MGC_NUM_OUT_STREAM
[Outbound Streams Number]
Determines the SIGTRAN group's number of outbound streams.
The valid range is 2 to 0xFFFE.
The default value is 2.
12.2.4.2 SIGTRAN Interface IDs
Table 12-3: SIGTRAN Interface IDs
ini File Parameter Name Description
SS7_SIG_IF_ID_INDEX
[Interface Number
Determines the SS7 interface ID index, for a line.
The valid range is 0 to 15.
The default value is 1.
SS7_SIG_IF_ID_VALUE
[Interface ID]
Determines the SIGTRAN interface ID value.
The valid range is 0 to 0xFFFFFFFE.
The default value is 0.
SS7_SIG_IF_ID_NAME
[Interface ID Name]
Determines the SIGTRAN interface ID (text string).
The default string is ‘INT_ID’.
SS7_SIG_IF_ID_OWNER_GROUP
[Owner Group]
Determines the SIGTRAN interface ID owner group.
The valid range 0 to 0xFFFE.
The default value is 0.
SS7_SIG_IF_ID_LAYER
[Sigtran Layer Type]
Determines the SIGTRAN group layer (IUA/M2UA/M3UA).
0 = no_layer (default)
1 = iua
2 = m2ua
3 = m3ua
4 = m2tunnel
5 = V5ua
SS7_SIG_IF_ID_NAI
[IF ID NAI]
Determines the SIGTRAN interface ID NAI.
The valid range 0 to 0xFFFE.
The default value is 0xFFFE.
SS7_SIG_M3UA_SPC
[M3UA Local Point Code]
Determines the SIGTRAN M3UA SPC.
The valid range 0 to 0xFFFFFFFE.
The default value is 0.