User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
SIP User's Manual C. SIP Compliance Tables
Version 5.0 349 October 2006
C.5.4 4xx Response – Client Failure Responses
Table C-8: 4xx SIP Responses (continues on pages 349 to 350)
4xx Response Supported Comments
400 Bad Request Yes
The gateway does not generate this response. On reception of
this message, before a 200 OK has been received, the gateway
responds with an ACK and disconnects the call.
401 Unauthorized Yes
Authentication support for Basic and Digest. On receiving this
message the GW issues a new request according to the scheme
received on this response
402
Payment
Required
Yes
The gateway does not generate this response. On reception of
this message, before a 200 OK has been received, the gateway
responds with an ACK and disconnects the call.
403 Forbidden Yes
The gateway does not generate this response. On reception of
this message, before a 200 OK has been received, the gateway
responds with an ACK and disconnects the call.
404 Not Found Yes
The SIP
gateway generates this response if it is unable to
locate the callee. On receiving this response, the gateway
notifies the User with a Reorder Tone.
405
Method Not
Allowed
Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
406 Not Acceptable Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
407
Proxy
Authentication
Required
Yes
Authentication support for Basic and Digest. On receiving this
message the GW issues a new request according to the scheme
received on this response.
408 Request Timeout Yes
The gateway generates this response if the no-answer timer
expires. On reception of this message, before a 200OK has
been received, the gateway responds with an ACK and
disconnects the call.
409 Conflict Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
410 Gone Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
411 Length Required Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
413
Request Entity
Too Large
Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
414
Request-URL
Too Long
Yes
The
gateway does not generate this response. On reception of
this message, before a 200OK has been received, the gateway
responds with an ACK and disconnects the call.
415
Unsupported
Media
Yes
If the
gateway receives a 415 Unsupported Media response, it
notifies the User with a Reorder Tone.
The gateway generates this response in case of SDP mismatch.