User`s manual

SIP User's Manual G. Accessory Programs and Tools
Version 5.0 375 October 2006
G.1.5 Creating a Loadable Prerecorded Tones File
For detailed information on the PRT file, refer to Section 16.2.1 on page 332.
¾ To create a loadable PRT dat file from your raw data files, take
these 7 steps:
1. Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a
single dat file using standard recording utilities.
2. Execute the TrunkPack Downloadable Conversion utility, DConvert.exe (supplied with
the software package); the utility’s main screen opens (shown in Figure G-1).
3. Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s)
screen, shown in Figure G-3, opens.
Figure G-7: Prerecorded Tones Screen
4. To add the prerecorded tone files (you created in Step 1) to the ‘Prerecorded Tones’
screen follow one of these procedures:
• Select the files and drag them to the ‘Prerecorded Tones’ screen.
• Click the Add File(s) button; the ‘Select Files’ screen opens. Select the required
Prerecorded Tone files and click the Add>> button. Close the ‘Select Files’
screen.