User`s manual

Version 5.6 289 November 2008
SIP User's Manual 4. ini File Configuration
4.4.11 Number Manipulation and Routing Parameters
The number manipulation and routing-related ini file configuration parameters are described
in the table below.
Table 4-11: Number Manipulation and Routing ini File Parameters
Parameter Description
TrunkGroup
This ini file table parameter defines the device's endpoints and assigns
them to Hunt Groups. The format of this parameter is shown below:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_LastTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_Module;
[\TrunkGroup]
For example:
[TrunkGroup]
TrunkGroup 4 = 3, 0, 0, 1, 4, 101, 0, 1; (4 channels)
TrunkGroup 4 = 3, 0, 0, 5, 8, 201, 0, 0; (4 channels)
[\TrunkGroup]
Notes:
 This parameter can appear up to 8 times for 8-port devices and up to
24 times for MP-124 devices.
 The parameters TrunkGroup_FirstTrunkId,
TrunkGroup_LastTrunkId, and TrunkGroup_Module are not
applicable.
 For configuring this table in the Web interface, refer to “Configuring
the Endpoint Phone Numbers” on page 181 .
 For a description of ini file table parameters, refer to ''Structure of ini
File Table Parameters'' on page 233.
DefaultNumber
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 125.
ChannelSelectMode
For a description of this parameter, refer to ''SIP General Parameters''
on page 101.
TrunkGroupSettings
This ini file table parameter defines rules for port allocation per Hunt
Group. If no rule exists, the global rule defined by the parameter
ChannelSelectMode takes effect. The format of this parameter is as
follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,TrunkGroupSettings_ContactUse
r, TrunkGroupSettings_ServingIPGroup;
[\TrunkGroupSettings]
For example:
[TrunkGroupSettings]