User`s manual

MP-1xx/H.323
MP-1xx/H.323 User’s Manual 116 Document #: LTRT-00651
BootP replies are sent to the MP-1xx immediately after the remote reset command.
A.2.3 Client Configuration Window
Figure 10-3 is the Client Configuration Window in which clients are added and defined.
Figure 10-3: Client Configuration Window
In the left pane of the window is the client list. By clicking on a client in this list, the following
parameters for this client are displayed on the right side of the window:
Client MAC: This is the MAC address of the client. When the User edits the MAC,
a new client is added, with the same parameters as the previous
client.
The client can be disabled by un-checking the check box on the
right side of the Client MAC, causing the BootP server not to reply to
the BootP request. The client can be enabled by checking the
check box. Click on the ‘Apply’ button each time the client enable
check box is checked or unchecked.
Client Name: Free text for client description.
Template: The template to be used for this client. When a template is selected,
its parameters override all of the previous parameters.
IP, Subnet, Gateway: Normal IP parameters.
TFTP Server IP: The IP of the TFTP Server.
Boot File, ini File: The files to request from the TFTP server.
Call Agent: The IP of the MGCP Call Agent that will be controlling the
Gateway.
Note the seven check boxes to the right of the parameters. These enable the User to assign only