Owner's Manual
Table Of Contents
- Installation Manual
- Table of Contents
- Important Safety Instructions
- Chapter 1: Introduction
- Chapter 2: Quick Start Guide
- Chapter 3: Hookup Diagrams
- Chapter 4: Installation
- Chapter 5: Features
- Chapter 6: Adjustments
- Chapter 7: Troubleshooting
- Chapter 8: Specifications
- Chapter 9: Service
- Chapter 10: Please Remain Calm
- Chapter 11: Complementary Doodle Pages
- Chapter 12: Accessories
17
Chapter 5: Features
Rear Panel Features
5. Power Switch – In the OFF position, the AC line voltage is
disconnected from all internal circuits, and no amount of
remote control pressing, input signals playing, RS232 com-
munications, telepathy, or loud yelling will turn it back on. Turn o
the power switch when you are not using the amplier for long
periods of time, such as a nice two-week vacation to a golden
sandy beach somewhere (sigh), or during lightning storms, elec-
trical power outages, or zombie apocalypse. Keep the amplier
turned o when making connections or when disconnecting.
The Bijou 600 can also be used in the ON position, where it will be
a lot more useful and fun. Do not turn it on until all connections
have been made, and you are sure the voltage selection switch is
set to the correct local AC voltage.
6. Voltage Selection Switch – This slide switch allows you to
set the amplier to your local AC voltage. Always make sure
it is in the correct position before connecting the AC power
cord, as the incorrect setting will damage the amplier.
7. AC Input – This is where you connect the supplied AC
power cord. First make sure that the power switch is o,
and the voltage selection switch is in the correct position,
and then push in the power connector rmly to make a
secure connection.
7
5 6 14 15
8 9 11
12
191817161310