Owner's Manual

11
Cover Plate Removal
The cover plate must be removed to gain access to
the controls, and then put back on again to protect
the controls from dust bunnies.
Removal Procedure
1. Locate the top four screws that hold the cover
plate in place.
2. Use a philips screwdriver to remove the four
screws.
3. Keep the cover plate and screws in a safe and
handy place, until you have nished adjusting
the controls to your immense satisfaction.
8.300”
8.910”
9.410”
2.97”
2.38”
1.75”