Installation manual

ACCESS/A A711 L-Series Installation Manual 09RE416 REV. A

Unit modifications that can be set in the field during installation:

Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):

Main RX Board

PILOT HEADSET Impedance: 150/600 or 8/20 ohms

SPEAKER AUDIO: RX Audio ON/OFF

CST/MUSIC/AUX (TAPE) Audio ON/OFF

HEADSET AUDIO: CST/MUSIC/AUX (TAPE) Audio ON/OFF

RX VOL MIIN: Set to 5% or Set to 0%

CST/NAV/MUSIC Function Jumpered CST

Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):

Mic Processor Board

PAL OPT 1: Jumpered

PAL OPT 2: Jumpered

OPT 3 (Pil. TX Muting) Jumpered

Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):

Main TX Board

Backlight Range 50/100% Jumpered 100%

TX Annunciator RED/GREEN Jumpered RED (Green for NVG)

Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):

POT Board

PA Audio Tick (ON/OFF) Jumpered OFF

Refer to the Service Manual for locations and further details.